Third Coast Material Handling LLC

"Built on a foundation of Trust, Honor, and Integrity."

We provide rolling steel doors, coiling grilles, storm shutters, and counter shutters.
 
Third Coast provides products that comply to the strict insurance requirements in coastal areas where additional design features are needed in order to meet the insurance and city codes. Third Coast can provide drawings to your engineer certifying the doors windload specifications.

Buying Decision

Product

Product Specification

Features

Best

Operation

Sectional Door

Torsion spring (high cycle available)

  • Door sections are hinged and sections are guided on door track with ball bearing rollers
  • Applications: Standard lift, high lift or full vertical lift, depending on head room
  • Door is balanced throughout the door travel; typically less than 30 pounds of force required throughout the door travel
  • Spring exposed
Best

Rolling Door

Torsion spring (high cycle available)

  • Door curtain slides between heavy angle iron guides using end guide wear plates; curtain rolls into a "barrel" above door opening.
  • Door balance differs throughout the door travel.
  • Out of balance typically adjusted by operator mechanism (gearing changed for doors that are more out of balance)
  • Designed for not more than 25 pounds of force
  • Only small doors use manual push-up operation
  • Able to configure large "special" doors for special applications

Sheet Door

Torsion spring

  • Balance differs throughout the door travel
  • Out of balance typically adjusted by operator mechanism
  • Designed for not more than 25 pounds of force
  • Doors are lighter than the rolling doors, therefore a larger range available in manual push-up
  • Over 10' x 10' use chain hoist
Appearance

Sectional Door

Typically 24" high sections hinged together

  • Very flexible in material (steel and aluminum) and steel gauges
  • Colors: baked-on enamel or custom finish
  • Multiple exterior appearances (raised panel, flush sections, ribbed, full view glass), various window configurations
  • Various options of insulation type and values
Best

Rolling Door

Typically 2-5/8" high slats hemmed together

  • Available in a variety of gauges and materials including aluminum and stainless steel
  • 1 or 2 slat profiles; uniform curtain thickness
  • Foamed-in-place urethane insulation; R-values typically less than 8
  • Perforated slats allow for air flow while still providing security
  • Windows are riveted in place; typically 2" x 10"

Sheet Door

Typically 24" high sections hemmed together

  • Typically 26 gauge sheets; available in a variety of colors; best paint warranty in the industry (25-year)
  • Small windows
  • Foil covered "blanket" insulation available; R-value 3
Durability

Sectional Door

More components

  • Sections hinged with individual hinges spaced no more than 48" on center
  • Ball bearing rollers designed for size and weight of door
  • Torsion springs power unit open; easily lubricated
  • Lift cables designed for 7:1 safety factor

Rolling Door

Components comprise curtain, springs, guides and operator

  • Guides are heavy structural steel
  • Springs are enclosed in barrel and hood (not visible)
  • Curtain has continuous hinge (length of section); longer wear point
Best

Sheet Door

Typically 24" high sections hemmed together; components similar to rolling door

  • Roll-formed guides
  • Enclosed barrel makes spring lubrication difficult
Cost of Maintenance

Sectional Door

More components


Rolling Door

Components comprise curtain, springs, guides and operator

  • Guides are heavy structural steel; typically no maintenance required
  • Springs are enclosed in barrel and hood (not visible) and difficult to change / maintain if one breaks
  • Notched guide enables change of slat; difficult to remove and replace damaged slats.
Best

Sheet Door

Typically 24" high sections hemmed together; components similar to rolling door

  • Typically replace entire door sheet
  • Exchange entire barrel if spring is broken
Energy Efficiency

Sectional Door

Expanded polystyrene; CFC-free urethane

  • Options for friction fit or sandwich (bonded) structure
  • R-values up to 17.2
  • U-values enabling government energy tax credits
  • Vary by section thickness
Best

Rolling Door

CFC-free urethane insulation or mineral wood insulation in fire doors

  • Foamed-in-place between inside and outside slat cover; no thermal break
  • R-value up to 8.1
  • Mineral wool R-value up to 3

Sheet Door

Loose-fitting foil covered "blanket" of mineral wood

  • Foil covered mineral wool "blanket" held in place by "stays"
  • Rolls onto curtain barrel; not protected from the environment on inside of door
Initial Cost

Sectional Door

Modest initial material cost; modest installation cost

  • Different options determine initial cost of product; typically slightly higher than sheet door
  • Depending on size of door, installation time and cost slightly higher than rolling steel or sheet doors because of the number of components and varying applications

Rolling Door

Initial cost higher; installation time and expense depends on size of door

  • Different options determine initial cost of product; typically slightly higher than section and sheet doors
  • Depending on size of door, installation time and costs slightly higher than sheet doors; weight of the door necessitates heavier equipment

Sheet Door

Initial cost similar to sectional door; installation time and expertise required typically least in the industry

  • Different options determine initial cost of product; typically slightly less than sectional door
  • Depending on size of door, installation time and costs less than sectional doors.

commercial door houston | commercial door repair houston | industrial door repair houston | loading dock equipment repair houston | specialty doors houston | hollow metal doors houston | metal doors houston | custom metal doors houston | bulletproof doors houston | bulletproof windows houston | aircraft hangar doors houston | aircraft hangar door repair | hangar door repair houston | airplane hangar door repair | custom doors houston | flood control device houston | flood control houston | blast door houston | airtight doors | sound proof doors houston | acoustic doors | sound proof door | watertight doors | large commercial door repair houston | commercial overhead door repair | four fold doors | fire station door repair houston | fire door repair houston | how to reset a rolling fire door | fire door drop test | storm shutters | hurricane shutters galveston |Carriage Doors Houston |Carriage House Doors Houston | Commercial Garage Door Openers Houston | Commercial Garage door Operators Houston | Commercial Garage Doors Houston | Commercial Operators Houston |  commercial Overhead Doors Houston | Commercial Overhead Garage Doors Houston | Commercial Roll Up Garage Doors | Counter Shutter Doors Houston | Fire Rated Doors Houston | Garage Doors | Garage Door Houston | Garage Doors Houston | Garage Door Openers Houston | Garage Door Repair Houston | Garage Door Service Houston | Genie Garage Door Houston | Genie Garage Door Opener Houston | Houston Garage Doors | Houston Overhead Door | Insulated Garage Doors Houston | Overhead Door Houston | Overhead Doors Houston | Overhead Garage Doors Houston | Roll Up Doors Houston | Rolling Grille Doors Houston | Warehouse Garage Doors Houston | Wood Garage Doors Houston